Technomark M4 inline - Marking Depth and IDI Function

Page 13 of 44
TRAÇABILITÉ CRÉATIVE
CREATIVE TRACEABILITY
www.technomark-marking.com
Version from 04/11/2015
TECHNOMARK
3 Allée Michaël FARADAY
Parc d’activités STELYTEC
42400 SAINT-CHAMOND (France)
Tel: +33 (0) 4 77 22 25 91
Fax: + 33 (0) 4 77 22 38 93
E-mail : info@technomark-marking.com
5.2.4. Head checklist
This checklist shows the different verifications of the marking head made before packaging:
Illustration 9: Head checklist
From top to bottom:
· Date checklist was completed
· Operator who assembled the head
· Operator who performed the inspection
· Head serial number
·
Type of head connector output (Standard or
with optional NAI0-0001)
· Window size
· Cable length
· Verification of covers and fasteners
· Verification of accessories
· Other verifications
5.2.5. Maintenance kit (Optional accessory)
Refer to the chapter 7 List of available accessories and options to learn the contents of the maintenance kit.
Illustration 10: Maintenance kit