Technomark M4 inline - Waiting Input Configuration; Output Change Configuration; ZInline Axis Moves

Page 26 of 44
TRAÇABILITÉ CRÉATIVE
CREATIVE TRACEABILITY
www.technomark-marking.com
Version from 04/11/2015
TECHNOMARK
3 Allée Michaël FARADAY
Parc d’activités STELYTEC
42400 SAINT-CHAMOND (France)
Tel: +33 (0) 4 77 22 25 91
Fax: + 33 (0) 4 77 22 38 93
E-mail : info@technomark-marking.com
8.1.1.1. Recommended integration orientations
The orientations of the marking head presented below are recommended for the majority of integrations.
Illustration 24: Recommended integration orientations (1/2)
Illustration 25: Recommended integration orientations (2/2)
The installation of the machine with a recommended orientation does not exclude the need for the integrator
to put in place the necessary measures to avoid any solid and liquid material being projected toward the
machines.
Th
Th
Th
Th
Th
Th
Th
Th
Th
Th
Th
Th
Th
Th
Th
Th
Th
Th
Th
Th
Th
Th
Th
Th
Th
Th
Th
Th