TRAÇABILITÉ CRÉATIVE
CREATIVE TRACEABILITY
www.technomark-marking.com
3 Allée Michaël FARADAY
Parc d’activités STELYTEC
42400 SAINT-CHAMOND (France)
Tel: +33 (0) 4 77 22 25 91
Fax: + 33 (0) 4 77 22 38 93
E-mail : info@technomark-marking.com
7.5.4. Compatibility fixing kit for reinforced Multi4 V2 fixing kit
For replacing a Multi4 V2 machine with a reinforced fixing kit.
Accessory reference: NAI0-4001
Optional reference: NOI0-0003
It is supplied with 4 CHC M5 × 20mm screws and 4 x 5mm diameter security washers for attachment to the marking
head.
7.5.5. Compatibility fixing kit for Multi4 V1 (NAI0-4002)
Multi 4 V1 machines only come with a single window size (110 x 50 mm) this fixing kit allows for the placement of an
M4 inline 120.
As the window size is slightly smaller than the original M4 inline 120 (120 x 55mm) the Y position shifts 5mm
towards the front of the marking head, the X position remains unchanged.
Reference NAI0-4002
Optional reference: NOI0-0004
It is supplied with FHC M5 x 20mm screws for attachment to the marking head.
To Next Page
Loading...
