Technomark M4 inline - Variable Configuration

Page 17 of 44
TRAÇABILITÉ CRÉATIVE
CREATIVE TRACEABILITY
www.technomark-marking.com
Version from 04/11/2015
TECHNOMARK
3 Allée Michaël FARADAY
Parc d’activités STELYTEC
42400 SAINT-CHAMOND (France)
Tel: +33 (0) 4 77 22 25 91
Fax: + 33 (0) 4 77 22 38 93
E-mail : info@technomark-marking.com
6.2.Marking head
6.2.1. Possible configurations
The M4 inline machine exists with two different window sizes M4 inline 50 (50 x 55mm) and M4 inline 120 (120 x
55mm).
In addition to these dimensions the head connector can be either be located on the top surface of the head
(standard) or at the rear (NOI0-0001 option to be specified in the order).
Illustration 17: M4 inline head - connector on top surface Illustration 18: M4 inline head - connector on rear surface