TRAÇABILITÉ CRÉATIVE
CREATIVE TRACEABILITY
www.technomark-marking.com
3 Allée Michaël FARADAY
Parc d’activités STELYTEC
42400 SAINT-CHAMOND (France)
Tel: +33 (0) 4 77 22 25 91
Fax: + 33 (0) 4 77 22 38 93
E-mail : info@technomark-marking.com
8.2.4. Cabling the 16-way card
The M4 inline control unit features a 16-way card, which allows the user to choose whether each way is an input or
an output and its associated function (see M4 inline Software User Manual Chapter 16-way configuration)
The control unit is supplied with a subD 25 male connector kit to enable the integrator/user to connect it as
required.
Note that it is possible to operate with either so-called internal power or external power. You will find different
cabling examples in the following examples.
Information concerning cabling is available in the manual M4 inline Interfacing instructions.
To Next Page
Loading...
