Technomark M4 inline - Logo Insertion

Page 21 of 44
TRAÇABILITÉ CRÉATIVE
CREATIVE TRACEABILITY
www.technomark-marking.com
Version from 04/11/2015
TECHNOMARK
3 Allée Michaël FARADAY
Parc d’activités STELYTEC
42400 SAINT-CHAMOND (France)
Tel: +33 (0) 4 77 22 25 91
Fax: + 33 (0) 4 77 22 38 93
E-mail : info@technomark-marking.com
7. List of available accessories and options
This informative list is not exhaustive and Technomark reserves the right to modify it at any time.
Please contact the Technomark commercial services or your dealer for the list of accessories and options available
for your equipment.
7.1.Maintenance kit (Optional accessory)
Illustration 22: Contents of maintenance kit
Description of maintenance kit contents:
Top: Lubricant Bottle
From left to right :
· Complete impact unit (see impact unit in
the M4
inline Maintenance manual)
· 2 IDI stylus springs
·
60mm (2.36in) carbide stylus sharpened to 90°
(standard model)
· Technomark usb stick
7.2.External keyboard (Included in machine pack)
Two keyboard layouts are available:
· AZERTY – Reference NAI0-6000
· QWERTY – Reference NAI0-6001
7.3.19 inch rack mounting plates (Optional accessory)
Your M4 inline control unit can be installed in a 19 inch rack by using the rack mounting plate kit available as an
accessory: reference NAI0-5001. Installation instructions are available in Paragraph 8.2.3 19 inch rack installation.
Illustration 23: 19 inch rack mounting plate