Technomark M4 inline - Mechanical Settings

Page 41 of 44
TRAÇABILITÉ CRÉATIVE
CREATIVE TRACEABILITY
www.technomark-marking.com
Version from 04/11/2015
TECHNOMARK
3 Allée Michaël FARADAY
Parc d’activités STELYTEC
42400 SAINT-CHAMOND (France)
Tel: +33 (0) 4 77 22 25 91
Fax: + 33 (0) 4 77 22 38 93
E-mail : info@technomark-marking.com
8.2.4.1. Input cabling with internal power supply
Control unit internal power supply +24V DC (500mA) is available on pin 25, the ground on pin 23.
Illustration 45: Example of input cabling with internal power supply
8.2.4.2. Output cabling with internal power supply
Illustration 46: Example of input cabling with internal power supply
Be sure to check that the total current drawn by connected equipment does not exceed 500mA.
Be
Be
Be
Be
Be
Be
Be