Techroutes WG3100 Series - General Purpose Commands in Config Mode; Set Time (Clock Set); Save the Configuration (Save); Restart Device (Reset Eia)

WG3100-Series GSM VoIP Gateway User Manual
_______________________________________________________________________________
Techroutes Network Pvt. Ltd.
108
5.3.2 GENERAL PURPOSE COMMANDS IN "CONFIG" MODE
Set time (clock set)
Save the configuration (save)
Restart device (reset eia)
Enable debug
The command format is deb port + port number, to enable port 0 debug, as below:
To enable all ports debug, with the command “deb port all”
Without this steps, no trace logs will display on output window