EasyManua.ls Logo

Techroutes WG3100 Series - SIP Trunk Configuration

Techroutes WG3100 Series
114 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
WG3100-Series GSM VoIP Gateway User Manual
_______________________________________________________________________________
Techroutes Network Pvt. Ltd.
58
408
Request Timeout
403
Forbidden
486
Busy Here
480
Temporarily unavailable Resource unavailable
503
Service Unavailable
Response Code switch
This part specifies response codes of SIP between gateway and SIP server. Refer to table SIP Response, the SIP server
possibly need some specific SIP response from the gateway. Example, SIP server need SIP response 180 Ringing instead of
183 Ringing, the configuration should be as below:
4.9.2 SIP Trunk Configuration
Table 4-11-1 Description of IP Trunk
Parameters
Description
SIP Trunk
Add remote IP of Softswitch, SIP server which will send call traffics to
gateway.
Index
It uniquely identifies a trunk. Its value is assigned globally, ranging
from 0 to 31.
Description
It describes the trunk for the ease of identification. Its value is

Table of Contents