TP8-64 - User Manual Control by console
4-1
4. CONTROL BY CONSOLE
The control panel can be controlled and programmed through LCD console by different operators using different access
codes. Every code is enabled to accede to a specific operating level of the control panel.
The system distinguishes the following codes:
z 1 installer code (default code 54321)
The installer code is reserved for the installer and gives access to the installer programming menu.
z 1 master code (default code 12345)
The master code is usually reserved for the owner of the system and gives access to the master programming
menu as well as the standard arming/disarming and parset functions.
WARNING
If the control panel is armed, the installer will not be able to execute any programming (installer/master
programming menu) via console (access denied). He will have to disarm the system before.
To Next Page
Loading...
