Control by keypoint User Manual - TP8-64
5-14
5.5.3 BY-PASS
If the wireless key is programmed for the activation and deactivation of by-pass, the arming and disarming functions
change as follows:
z Arming program becomes activation by-pass program
z Disarming program becomes deactivation by-pass program
z Disarming becomes deactivation general by-pass
To activate by-pass, simply press the corresponding function key.
5.5.4 LEARNING
The wireless key must be recognized from the control panel before use.
The name of this function is learning (see § 3.9.4).
To Next Page
Loading...
