EasyManua.ls Logo

Tecnoalarm TP8-64 - Opening Message

Tecnoalarm TP8-64
76 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TP8-64 - User Manual Control by telephone
6-3
Speak loudly and clearly into the mouthpiece of the telephone for max. 10s.
On expiry of the recording time the control panel emits 4 beeps.
Playing of the opening message
To play the opening message, press:
+ 2
The control panel plays the opening message.
6.2 RECEPTION OF AN ALARM CALL
If the control panel has been programmed appropriately, it calls for alarms and supplies the following indications:
z Opening message (10s)
z First alarm message
+ # to pass to possible other alarm messages
z Remote digital verification of the active RDV detectors (belonging to the program in alarm) for approximately 20s
After the verification of the alarms, or after the alarm messages, if there are no RDV detectors connected to the control
panel, the communication is shut down.

Related product manuals