Tecnoalarm TP8-64 - Timers

Programming User Manual - TP8-64
3-4
Creation/modification of the program
+ # to start creation/modification of the program selected
+ yw to select the zone 1...64 to include in the program
+ # to confirm
Commands available
+ # to include the zone in the program
+ * to remove the zone from the program
+ EXIT to confirm and quit
Viewing of the current settings
[ ] zone not included in the program
[ # ] zone included in the program
3.5 TIMERS AND THE ACCESS PERIODS
Select the timers menu and confirm by clicking on the # key.
Functions available
z Timers
z Access periods
Commands available
+ yw to select the function
+ # to confirm
3.5.1 TIMERS
The timers permit the automatic execution of scheduled functions (automatic
arming/disarming or activation/deactivation of by-pass). The control panel provides
16 independent timers.
+ yw to select the timer 1...8
+ # to confirm
Submenus
z Action
z Attribute
z Programs
z Starting hour
z Temporary block
Commands available
+ yw to select the option
+ # to confirm
ACTION
Select the action the timer selected is to be activated for:
z Arming
z Disarming
z Activation of by-pass
z Deactivation of by-pass
Commands available
+ yw to select the action
+ # to confirm
+ EXIT to confirm and quit
ATTRIBUTE
Select the frequency of activation of the timer selected:
z Not active z every pre-holiday z every Monday
z every Thursday z every day z every holiday
z every Tuesday z every Friday z every working day
z every Sunday z every Wednesday z every Saturday
Commands available
+ yw to select the frequency
+ # to confirm
+ EXIT to confirm and quit
Program 01 1
Associate zones
Associate zones
Ctrl panel Z1 [ # ]
Menu 9
Timers
Timers 2
Timers
Timers 1
Timer 01
Timer 01 1
Action
Timer 01 2
Attribute
Timer 01 3
Programs
Timers 3
Access periods
Programs 1
Program 01