TP8-64 - User Manual Index
1
INDEX
1. GENERAL FEATURES
1.1 CODES 1-1
1.1.1 Master menu 1-1
1.1.2 Standard user menu 1-2
1.2 ELECTRONIC KEYS 1-2
1.3 CONTROL BY TELEPHONE 1-2
1.3.1 Skip answering machine 1-2
1.4 PROGRAMS 1-3
1.5 COMPOSITION OF THE CONTROL PANEL 1-3
2. SIGNALING
2.1 LED SIGNALING OF THE CONSOLES 2-1
2.1.1 Alarm LED - Red 2-3
2.1.2 Control LED - Yellow 2-5
2.2 LED SIGNALING OF THE TP SDN ELECTRONIC KEYPAD 2-6
2.2.1 Program alarm LED - Yellow 2-6
2.2.2 General alarm LED - Red 2-6
2.2.3 Keypad status LED - Green 2-7
2.2.4 Program status LED - Red 2-7
2.3 LED SIGNALING OF THE TP SK6N KEY READER WITH MINI KEYPAD 2-8
2.3.1 Program alarm LED - Red 2-8
2.3.2 General alarm LED - Red 2-8
2.3.3 Program status LED - Yellow 2-9
2.3.4 Zone status LED - Yellow 2-9
2.3.5 Key LED - Green 2-9
2.4 LED SIGNALING OF THE ATPK KEY READER 2-10
2.4.1 Program status LED - Red, yellow, green 2-10
2.4.2 Program and general alarm LED - Yellow 2-10
2.5 RESET OF ALARM MEMORY SIGNALING 2-11
2.5.1 Reset of LED signaling with master code 2-11
2.5.2 Reset of LED signaling with installer code (tamper LED signaling) 2-11
3. PROGRAMMING (MASTER CODE REQUIRED)
3.1 ACTIVATION/DEACTIVATION REMOTE CONTROLS 3-3
3.2 CLOCK SETTING 3-3
3.3 FUNCTIONS 3-3
3.4 CREATION/MODIFICATION OF THE PROGRAMS 3-3
3.5 TIMERS AND ACCESS PERIODS 3-4
3.5.1 Timers 3-4
2.5.2 Access periods 3-5
3.6 PROGRAMMING OF THE TELEPHONE PARAMETERS 3-6
3.6.1 Settings 3-6
3.6.2 PABX switchboard 3-6
3.6.3 Channels (A...H) 3-7
3.6.4 Call back 3-7
3.6.5 Mobile phone 3-7
3.7 PROGRAMMING OF THE CODES 3-8
3.7.1 Master code 3-8
3.7.2 Standard user codes 3-9
3.8 PROGRAMMING OF THE KEYS 3-10
3.8.1 Access periods 3-10
3.8.2 Programs 3-10
To Next Page
Loading...
