TP8-96 VIDEO - Installer Manual Programming of access codes and keys
5-3
z Privileged
If checked, the code beside the normal functions is enabled for viewing of the general alarm log and the event
log of the associated programs. In addition, the code will give access to part of the programming menu.
z Exclusion disabled
If checked, the user will not be entitled to arm the control panel excluding some of the zones (both voluntary and
automatic zone exclusion are disabled). The control panel will be armed in any case, and if there are open zones,
the alarm will be released.
z Disabling access to remote controls
If checked, the user will not be entitled to arm or disarm the associated programs at distance by remote controls.
Repeat the procedure for all the user codes (1 to 200).
See § 5.4 for explanatory notes.
Press:
z OK to confirm and quit
z Abandon to quit without saving
To Next Page
