4-122
Value
Function
Contents
Control mode
Name LCD display V/F SLV
PM
SLV
23 Reserved Reserved Reserved - - -
24 Reserved Reserved Reserved - - -
25 Reserved Reserved Reserved - - -
26 Reserved Reserved Reserved - - -
27 Reserved Reserved Reserved - - -
28 Reserved Reserved Reserved - - -
29 Reserved Reserved Reserved - - -
30 Motor 2 Selection Motor 2 Selection ON：Switch to Motor 2 O O X
31 Reserved Reserved Reserved - - -
32 Reserved Reserved Reserved - - -
33 Reserved Reserved Reserved - - -
34 Reserved Reserved Reserved - - -
35 Reserved Reserved Reserved - - -
36 Reserved Reserved Reserved - - -
37
Detection Output of
PID Feedback Loss
PID Fbk Loss ON：Detection Output of PID Feedback Loss O O O
38 Reserved Reserved Reserved - - -
39 Reserved Reserved Reserved - - -
40 Reserved Reserved Reserved - - -
41 Reserved Reserved Reserved - - -
42 Reserved Reserved Reserved - - -
43 Reserved Reserved Reserved - - -
44 Reserved Reserved Reserved - - -
45 Reserved Reserved Reserved - - -
46 Reserved Reserved Reserved
47 Reserved Reserved Reserved - - -
48 Reserved Reserved Reserved - - -
49 Reserved Reserved Reserved - - -
50 Reserved Reserved Reserved - - -
51 Reserved Reserved Reserved - - -
52 Reserved Reserved Reserved - - -
53 Reserved Reserved Reserved - - -
54
Turn On Short-Circuit
Braking
SC Brk ON：Turn on short-circuit bbraking X X O
55
Low Current
Detection
Low Current
Detect
ON：Output Current ≦ 03-48 Low Current
detection level
O O O
59 OH Detection OH Detect Output ON：OH Detect Output O O O
(1) During Running (03-1X=0)
ON：Run command is ON or output frequency is greater than 0.
OFF：Run command is OFF and the inverter is stopped.
(2) Fault Contact Output (03-1X=1)
Output is active during fault condition.
(3) Frequency Agree (03-1X=2)
To Next Page
Loading...
