4-143
Auto Run examples are shown as following.
(1) Single cycle (06-00=1,4)
The inverter will run for a single full cycle based on the specified number of sequnces,
thenit will stop. In this example, 4 sequences are set, three in forward direction and one in
reverse direction.
Figure 4.3.52 Single cycle operation (Stop)
(2) Periodic Cycle Run (06-00=2,5)
The inverter will repeat the same cycle periodically.
All other parameters are set same as “Example 1” shown above.
Figure 4.3.53 Periodic cycle run
To Next Page
Loading...
