26 V8-U-TXT.PM6 : Issue I , Revision I : October 1997
QUICK ALARM HISTORY
This function provides a list of past alarm events.
It is a fast and simple way to determine the location of the input which caused an alarm. This information may be necessary
where you have to reset an alarm without first checking the cause.
1. Before commencing, the display must show:
There Are No Alarms In This Area
Code:
Note: You cannot access alarm history if there is currently an alarm condition.
2. ENTER ENTER ~ Press (twice)
The display will show the following details of each alarm: (The most recent alarm is shown first)
The time the alarm occurred as hour & minutes - HH:MM.
The date the alarm occurred as day & month - DD:MM.
The type and location of the alarm.
eg. *13:23 31/10 LOCAL ALARM Input 1 Fire D>
1-Scan, 0-Exit
3. From the history display it is possible to :
ENTER ~ Move backwards through the history, one event at a time, from
most recent alarm to oldest alarm.
NEXT ~ Move forwards through the history, one event at a time.
or 0 ~ Exit the history and return to the display showing
There Are No Alarms In This Area
or 1 ~ Scan the display to view the complete input name where the alarm
has occurred.
See Also : History - Menu Option 5
www.msealarms.com.au
To Next Page
Loading...
