58 V8-U-TXT.PM6 : Issue I , Revision I : October 1997
DOOR AND FLOOR GROUPS - Menu Option 20
FLOOR GROUPS
Each floor group contains a list of 64 floors and the time zone for each floor within the group.
Authorised access to the floor is only valid during the time zone.
1. The display will show:
Floor Groups
Group No:
? ? ENTER ~ Enter floor group number, and move on to next display.
ENTER ~ Press. Return to the initial display, "Groups, 1-Doors 2-Floors".
2. The display will show.
eg. Floor Grp 1 F1-00 F2-01 F3-** F4-**
Enter Floor:
? ? ENTER ~ Select floor number, and move on to next display.
ENTER ~ Press. Return to previous display, "Floor Groups".
3. The display will show.
eg. Floor Grp 1 F3-** F4-** F5-** F6-**
*-Dis,Tz-F3:
MENU * ~ Disable floor for this floor group.
or ? ? ENTER ~ Enter time zone number and return to step 2.
or ENTER ~ Return to step 2.
Note: 1. Timezone display: D1-00 Timezone 0 - 24 Hour Access
D1-** Door Disabled.
D1-?? Timezone to restrict access at the door to a specific time period.
2. Using Panel Link changes the standard numbering system seen here, to reflect that of Panel Link's system.
Important Note! Always remember to update your "Floor Group" List when any changes are made.
www.msealarms.com.au
To Next Page
Loading...
