Tekelec EAGLE 5 - Page 118

The beginning IMEI in a block.
bimei
14 or 15 hexadecimal digits expressed using ASCII characters. Only
the first 14 digits of the IMEI are stored and displayed on retrieval.
Values:
The ending IMEI in a block.
eimei
14 or 15 hexadecimal digits expressed using ASCII characters. Only
the first 14 digits of the IMEI are stored and displayed on retrieval.
Values:
(Optional) Select list type of White.
white
yes or no (default = no).
Values:
(Optional) Select list type of Gray.
gray
yes or no (default = no).
Values:
(Optional) Select list type of Black.
black
yes or no (default = no).
Values:
(Optional) Specify the number of seconds to wait for the write transaction if another
connection already has it. Clients waiting for the write transaction with this
timeout
mechanism are processed in the order that their requests were received. This option
is only allowed if the client used the txnmode single option on its connect request.
0 (return immediately if not available; default)
Values:
1 - 3600 seconds
Rules
1. Each imei provisioned must reside on at least one list type (white, gray, or black) and can also
reside on any combination of 1, 2, or 3 lists concurrently.
2. If the imei includes the optional 15th character (the check digit), the check digit is provided by the
Customers Client Software and must match the EPAPs (via calculated algorithm). The check digit
is not stored; it is only used to verify the imei. The check digit is run on both the bimei and eimei
when applicable.
3. The svn is not provisionable on an imei block entry.
118
910-6022-001 Revision A, March 2011
PDBI Request/Response MessagesProvisioning Database Interface Manual