Tekelec EAGLE 5 - Table 15: Retrieve Network Entity Response Return Codes

[srfimsi XXXXX,] counts([imsi ###,] [dn ###,] [dnblock ###])),
( ... ) )
As with the responses for retrieving subscriptions, the response can be broken up into multiple
responses due to size constraints. Intermediate responses have the return code PARTIAL_SUCCESS.
If the data value is count, the data section contains only the number of instances that matched the
query.
data (counts(ne ###))
The return codes listed in Table 15: Retrieve Network Entity Response Return Codes indicate the result of
the Retrieve Network Entity request. See PDBI Message Error Codes for the recommended actions to
help resolve the error related return codes.
Table 15: Retrieve Network Entity Response Return Codes
Data Section ContentsDescriptionTextReturn
Code
See data description
above.
The request succeeded and
this is the last (or only)
response.
SUCCESS
0
IP address information of
client that already has the
write transaction.
Another client already has a
write transaction open.
WRITE_UNAVAIL
1005
data (id
<connection id>, ip
<ip addr>, port
<port num>)
NONEPDBI client making request
does not have write access
permissions.
NO_WRITE_PERMISSION
1006
NONEThere is no currently active
transaction for this
connection.
NO_ACTIVE_TXN
1009
Offending field is
returned in data section:
One of the fields specified had
an invalid value.
INVALID_VALUE
1012
data (param <field
label>)
NONE
The requested id was not
found.
NOT_FOUND
1013
110
910-6022-001 Revision A, March 2011
PDBI Request/Response MessagesProvisioning Database Interface Manual