Table 18: Dump Connections Response Return Code
Data Section ContentsDescriptionTextReturn
Code
See above.Connection list returned.SUCCESS
0
Offending field is returned in data
section:
One of the fields specified had
an invalid value.
INVALID_VALUE
1012
data (param <field label>)
Create IMEI Data
This command creates either a single IMEI with its appropriate list type or a block of IMEIs with the
associated list type. This command is also used to add additional IMSIs to a particular IMEI.
Create a Single Entry IMEI
This command is used to create a new IMEI. Using the optional force parameter changes the default
behavior to overwrite any existing entry with the new data.
The ent_eir command defines the request message for a single entry IMEI.
Parameters :
A single IMEI.
imei
14 or 15 hexadecimal digits expressed using ASCII characters. Only
the first 14 digits of the IMEI are stored and displayed on retrieval.
Values:
(Optional) Software Version Number.
svn
A 2-digit number 0-9 (default = 0).
Values:
(Optional) Select list type of White.
white
yes or no (default = no).
Values:
(Optional) Select list type of Gray.
gray
yes or no (default = no).
Values:
(Optional) Select list type of Black.
black
116
910-6022-001 Revision A, March 2011
PDBI Request/Response MessagesProvisioning Database Interface Manual
To Next Page
Loading...
