Tekelec EAGLE 5 - Table 12: Create Network Entity Response Return Codes

[da <none/replace/prefix/insert/delccprefix/delcc/spare1
/spare2>,] [srfimsi XXXXX] [, timeout <0..3600>])
Create Network Entity Response
The return codes listed in Table 12: Create Network Entity Response Return Codes indicate the result of
the Create network entity request. See PDBI Message Error Codesfor the recommended actions to help
resolve the error related return codes.
Table 12: Create Network Entity Response Return Codes
Data Section ContentsDescriptionTextReturn
Code
NONEEverything worked.SUCCESS
0
Offending field is
returned in data section:
One of the fields specified had an
invalid value.
INVALID_VALUE
1012
data (param <field
label>)
NONE
The command was sent on a read
only transaction.
WRITE_IN_READ_TXN
1011
The network entity already exists.ITEM_EXISTS
1015
NONEThis request would cause current
transaction to be larger than the
limit.
TXN_TOO_BIG
1029
NONEThere is no currently active
transaction for this connection.
NO_ACTIVE_TXN
1009
NONEPDBI client making request does
not have write access permissions.
NO_WRITE_PERMISSION
1006
IP address information of
client that already has the
write transaction.
Another client already has a write
transaction open.
WRITE_UNAVAIL
1005
data (id
<connection id>, ip
<ip addr>, port
<port num>)
101
910-6022-001 Revision A, March 2011
PDBI Request/Response MessagesProvisioning Database Interface Manual