Figure 3: MPS/EPAP System Configuration
EPAP Status Reporting and Alarm Handling
Maintenance, measurements, status, and alarm information is routed from the Active EPAP to a
primary Service Module through EPAP Maintenance Blocks and Service Module Status Requests.
The status reporting, message format, and various alarm messages are discussed in detail in the EPAP
Administration Manual.
Provisioning Database Interface Description
This section describes the Provisioning Database Interface (PDBI) at a high level. The interface consists
of the definition of provisioning messages only.
24
910-6022-001 Revision A, March 2011
Functional DescriptionProvisioning Database Interface Manual
To Next Page
Loading...
