Data Section ContentsDescriptionTextReturn
Code
this error. Data (dn XXXXX,
counts([nsdn #####]))
The ST value of NSDN will be
returned in the data section
data (st <0/1>)
The specified ST value
conflicts with the ST value of
NSDN.
INCOMPATIBLE_ST
1050
The GRN value for the ASD
will be returned in the data
section. data (grn #####)
The GRN ROP value conflicts
with the GMT value for the
specified ASD.
INCOMPATIBLE_ROP
1051
The bdn and edn of conflicting
block will be returned.
The new DN Block requested
by the operator is a subset of
an existing block with same
properties.
DNB_SAME_PROPERTIES
1052
NONEThe new DN Block could not
be added to the database as
MULTI_DNB_CONFLICT
1053
multiple conflicting DN
Blocks were found within
given bdn-edn.
The bdn and edn of conflicting
block will be returned.
The new DN Block tries to
split an existing DN Block
that is not allowed to be split
DNB_SPLIT_NOT_ALLOWED
1054
or a new individual DN is
entered within an existing DN
Block that is not allowed to be
split.
Update Subscription
Update Subscription
This command modifies existing subscription data. Specific scenarios are described in the usage
variations below. Although all of the usage variations are called upd_sub , the existence of certain
parameters changes what is meant.
Modify the SP for a Specific IMSI
This command attempts to modify the sp field for a specific IMSI. If the IMSI has any DNs associated
with it, the DNs are modified to use the specified SP.
Note:
This type of subscription data is used only by the G-Flex feature.
Parameters:
A single IMSI.
imsi
74
910-6022-001 Revision A, March 2011
PDBI Request/Response MessagesProvisioning Database Interface Manual
To Next Page
Loading...
