Tekelec EAGLE 5 - Network Entity Commands

Requests that specify adata parameter ofcount gets just one response that contains the instance
count for the type of subscription data that they are querying. Only one of the optional counts
would be present in the response.
data (counts ([imsi #####,] [dn #####,] [dnblock #####]) )
The return codes listed in Table 11: Retrieve Subscription Data Response Return Codes indicate the result
of the Retrieve Subscription Data request. See PDBI Message Error Codes for the recommended actions
to help resolve the error related return codes.
Table 11: Retrieve Subscription Data Response Return Codes
Data Section
Contents
DescriptionText
Return
Code
Depends on the
request type, etc.
The request succeeded and this is the last
(or only) response.
SUCCESS
0
Offending field is
returned in data
section:
One of the fields specified had an invalid
value.
INVALID_VALUE
1012
data (param <field
label>)
Depends on the
request type, etc.
The request has succeeded, but this is only
one of many responses.
PARTIAL_SUCCESS
1016
NONEThe requested DN, DN block, or IMSI was
not found.
NOT_FOUND
1013
NONEThere is no currently active transaction
for this connection.
NO_ACTIVE_TXN
1009
NONEAn NE to filter was specified, but the NE
does not exist.
NE_NOT_FOUND
1021
Create Network Entity
The ent_entity command creates an entity object (such as an SP) and its corresponding global title
translation. There is a limit of 150,000 network entity instances.
It is valid for entities of different types to have the same id. Spare point codes, indicated by an optional
s- prefix, are supported for Network Entities with a pctype of intl and natl.
Create Network Entity Request
Parameters :
97
910-6022-001 Revision A, March 2011
PDBI Request/Response MessagesProvisioning Database Interface Manual