(Optional) How many seconds to wait for the write transaction if another
connection already has it.
timeout
0 (return immediately if not available; default)
Values:
1 - 3600 seconds
Request syntax :
begin_txn([iid XXXXX,] type <read|write>, [timeout <0..3600>])
Begin Transaction Response
The return codes in Table 5: Begin Transaction Response Return Codes indicate the result of the Begin
Transaction request. See PDBI Message Error Codes for the recommended actions to help resolve the
error related return codes.
Table 5: Begin Transaction Response Return Codes
Data Section
Contents
DescriptionTextReturn
Code
NONEEverything worked.SUCCESS
0
The IP address
information of the
Another client already has a write
transaction open. This is returned
WRITE_UNAVAIL
1005
client that already
only to clients who have WRITE
access permissions.
has the write
transaction.
Clients who have only READ
access receive
data (id
<connection
NO_WRITE_PERMISSION even
when another write transaction is
open.
id>, ip <ip
addr>, port
<port num>)
NONEThe PDBI client making the
connection does not have WRITE
access permissions.
NO_WRITE_PERMISSION
1006
NONE
An attempt to open a write
transaction occurred on the
Standby PDBA.
STANDBY_SIDE
1008
NONE
A read or write transaction is
already open on this connection.
ACTIVE_TXN
1010
58
910-6022-001 Revision A, March 2011
PDBI Request/Response MessagesProvisioning Database Interface Manual
To Next Page
Loading...
