Data Section ContentsDescriptionTextReturn
Code
NONEWould cause more than
8 IMSIs to be provisioned
on an IMEI.
IMEI_IMSI_LIMIT
1039
NONEThis request would cause
current transaction to be
larger than limit.
TXN_TOO_BIG
1029
NONEThe database already
contains data in request.
NO_UPDATES
1017
No update was
necessary.
NONEThere was no currently
active transaction for this
connection.
NO_ACTIVE_TXN
1009
NONEThe PDBI client making
request does not have
write access permissions.
NO_WRITE_PERMISSION
1006
IP address information of
client that already has the
write transaction.
Another client already
has a write transaction
open.
WRITE_UNAVAIL
1005
data (id <connection
id>, ip <ip addr>,
port <port num>)
Update IMEI Data
This command allows the list types for an IMEI or SVN to be changed.
Update a Single Entry IMEI
This command is used to update an existing single entry IMEI.
The upd_eir command defines the request message to update a single entry IMEI.
Parameters :
A single IMEI.
imei
14 or 15 hexadecimal digits expressed using ASCII characters. Only
the first 14 digits of the IMEI are stored and displayed on retrieval.
Values:
121
910-6022-001 Revision A, March 2011
PDBI Request/Response MessagesProvisioning Database Interface Manual
To Next Page
Loading...
