(Optional) Software Version Number.
svn
A 2-digit number 0-9 (default is not changed).
Values:
(Optional) Select list type of White.
white
yes or no (default is not changed).
Values:
(Optional) Select list type of Gray.
gray
yes or no (default is not changed).
Values:
(Optional) Select list type of Black.
black
yes or no (default is not changed).
Values:
(Optional) Specify the number of seconds to wait for the write transaction if another
connection already has it. Clients waiting for the write transaction with this
timeout
mechanism are processed in the order that their requests were received. This option
is only allowed if the client used the txnmode single option on its connect request.
0 (return immediately if not available; default)
Values:
1 - 3600 seconds
Rules
1. The resulting imei must have at least 1 list type (white, gray or black) turned on.
2. If the imei includes the optional 15th character (the check digit), the check digit is provided by the
Customers Client Software and must match the EPAPs (via calculated algorithm). The check digit
is not stored; it is only used to verify the imei.
Request syntax:
upd_eir([iid XXXXX] imei XXXXX, [svn 0..99,] [white
yes/no,][grey yes/no,] [black yes/no] [timeout <0..3600>])
Update a Block Entry of IMEIs
The upd_eir command defines the request message to update a block entry of IMEIs.
Parameters :
The beginning IMEI in a block.
bimei
122
910-6022-001 Revision A, March 2011
PDBI Request/Response MessagesProvisioning Database Interface Manual
To Next Page
Loading...
