Tekelec EAGLE 5 - Table 8: Create Subscription Response Return Codes

[cgbl <no/yes>,] [cdbl <no/yes>,] [spilt <no/yes>] [force yes/no,] [timeout
<0..3600>])
Create Subscription Responses
The return codes in Table 8: Create Subscription Response Return Codes might result from the Create
Subscription request. See PDBI Message Error Codes for the recommended actions to help resolve the
error related return codes.
Table 8: Create Subscription Response Return Codes
Data Section ContentsDescriptionTextReturn
Code
NONEEverything worked.
SUCCESS
0
The offending field is returned
in the data section:
One of the fields specified had
an invalid value.
INVALID_VALUE
1012
data (param <field
label>)
NONE
The create command was
sent on a read transaction.
WRITE_IN_READ_TXN
1011
The offending existing element
is returned. The type depends
on the type of request.
An entry was found already
in database matching an
element of this request. If
CONFLICT_FOUND
1014
force yes parameter is
data (dn XXXXX)
used and this option is
data (imsi XXXXX)
supported for this dta type,
this error is not returned.
data (bdn XXXXX, edn
XXXXX)
Rather, existing instances are
overwritten.
data (bprovbl XXXX, eprovBL
XXXX)
NONE
The specified NE does not
exist.
NE_NOT_FOUND
1021
NONE
The addition of DNs specified
in request would cause IMSI
to have more than eight DNs
IMSI_DN_LIMIT
1027
NONEThis request would cause
current transaction to be
larger than limit.
TXN_TOO_BIG
1029
72
910-6022-001 Revision A, March 2011
PDBI Request/Response MessagesProvisioning Database Interface Manual