Table 24: Retrieve Service Module Card Report Response Return Codes
Data Section
Contents
DescriptionText
Return
Code
See above.Everything worked.SUCCESS
0
Offending field is
returned in data
section:
One of the fields specified had an invalid
value.
INVALID_VALUE
1012
data (param <field
label>)
Depends on the
request type, etc.
The request has succeeded, but this is only
one of many responses.
PARTIAL_SUCCESS
1016
Retrieve a List of the Service Module Cards
This command is used to retrieve all or a subset of the Service Module cards known to the PDBA. It
does not need to be sent from inside a transaction. This request is different that the Service Module
card Report in that it does not attempt to determine any percent complete at a given level. It simply
returns all of the Service Module cards that meet the filter criteria.
The rtrv_dsmlist command defines the request message to retrieve the Service Module card data.
Parameters :
(Optional) Retrieve only the Service Module cards on the specified EAGLE 5 ISS node.
clli
1 - 11 alphanumeric characters, hyphen, or underscore.
Values:
(Optional) Retrieve only the Service Module cards that are in the specified card location.
cardloc
Four digit number.
Values:
(Optional) Retrieve only the Service Module cards that have the specified database
status.
status
loading - The card is currently loading the database.
Values:
resync - The card is loaded, but catching up to current provisioning stream.
coherent - The database is loaded and receiving normal provisioning
incoherent - Internal error on Service Module card (i.e. write failed to
database)
137
910-6022-001 Revision A, March 2011
PDBI Request/Response MessagesProvisioning Database Interface Manual
To Next Page
Loading...
