Tekelec EAGLE 5 - Page 138

inconsistent - Data mismatch between EPAP RTDB and Service Module
card RTDB.
corrupt - Internal error on Service Module card (checksum failure)
(Optional) Debugging option. Lets the requester specify whether they want to the see
all available information the PDBA has about cards.
data
status – Return the standard list of data for each card (default)
Values:
all – Return additional debug information
Request syntax:
rtrv_dsmlist([iid XXXXX,] [clli XXXX], [cardloc ####], [status
<value list above>])
Retrieve a List of the Service Module cards Response
The data section of a successful PDBA Status Query request contains the following information:
Parameters :
This parameter contains the message segment number.
segment
Values: ≥ 1 - Incrementing integer starting from 1.
List of Service Module cards that did not have a database level equal to or larger than main
message's level. Each Service Module card contains the following information.
dsms
Identifier for the Service Module card's EAGLE 5 ISS node. Values: String up
to 11 characters long
clli
Location identifier for the Service Module card in the EAGLE 5 ISS node.
Values: four-digit number
cardloc
The database status of the Service Module card.
status
Values: loading - The card is currently loading the database.
resync - The card is loaded, but catching up to current provisioning stream.
coherent - The database is loaded and receiving normal provisioning
incoherent - Internal error on Service Module card (write failed to database)
inconsistent - Data mismatch between EPAP RTDB and Service Module card
RTDB.
corrupt - Internal error on Service Module card checksum failure).
level - The database level for this card.
Values: 0 – 4294967295
138
910-6022-001 Revision A, March 2011
PDBI Request/Response MessagesProvisioning Database Interface Manual