Table 20: Update IMEI Response Return Codes
Data Section ContentsDescriptionTextReturn
Code
NONEEverything worked.SUCCESS
0
The offending field is
returned in the data
section:
One of the fields specified
had an invalid value.
INVALID_VALUE
1012
data (param <field
label>)
NONEA minimum of 1 list type
must be provisioned for
the resulting IMEI.
NO_LIST_FOR_IMEI
1042
imei, bimei, or eimeiThe check digit
provisioned did not
CHECK_ DIGIT_ ERROR
1037
data (param imei xxxxx)
match the calculated
check digit.
NONEThe requested IMEI or
IMEI block was not
found.
NOT_FOUND
1013
NONE
The update command
was sent on a read only
transaction.
WRITE_IN_READ_TXN
1011
NONEThis request would cause
current transaction to be
larger than limit.
TXN_TOO_BIG
1029
NONEThe database already
contains the data in the
NO_UPDATES
1017
request. No update was
necessary.
NONEThere was no currently
active transaction for this
connection.
NO_ACTIVE_TXN
1009
NONEThe PDBI client making
request does not have
write access permissions.
NO_WRITE_PERMISSION
1006
124
910-6022-001 Revision A, March 2011
PDBI Request/Response MessagesProvisioning Database Interface Manual
To Next Page
Loading...
