Recommended ActionTextError Code
Limit has been reached. EPAP only
supports assigning a maximum of 8 IMSIs
to a single IMEI.
PDBI_IMEI_IMSI_LIMIT1039
Contact Tekelec. Database capacity for
IMSIs has been reached.
PDBI_MAX_IMEI_LIMIT1040
Contact Tekelec. Database capacity for
IMSIs has been reached.
PDBI_MAX_IMEI_BLK_LIMIT1041
Provision at least one list type for IMEI
object. Each IMEI object must have a list
type attached.
PDBI_NO_LIST_FOR_IMEI1042
Limit has been reached. DN or DN Block
can have a maximum of 2 NE associations.
PDBI_SUB_NE_LIMIT1044
Command length exceeded 247 characters.
Remove unnecessary characters (including
PDBI_CMD_LENGTH_EXCEEDED1045
white space and parameters that are
specified as the default value) or perform
provisioning in two steps by using an enter
command followed by an update
command.
Contact Tekelec. Database capacity for ASD
records has been reached.
PDBI_MAX_ASD_LIMIT1046
The DN specified by nsdn does not exist.PDBI_DN_NOT_FOUND
1047
This request contains too many associations
for a DN or DN Block. The error is raised
PDBI_MAX_ASSOCIATIONS
1048
when TIF Number Substitution is combined
with other associations and distinct from
SUB_NE_LIMIT.
The record already refers to another record
through TIF Number Substitution. The
PDBI_UNRESOLVED_DEPENDENCY
1049
NSDN must be updated to none before a
new association can be formed.
The specified ST value conflicts with the
ST value of NSDN.
PDBI_INCOMPATIBLE_ST
1050
The GRN ROP value conflicts with the
GMT value for the specified ASD.
PDBI_INCOMPATIBLE_ROP
1051
164
910-6022-001 Revision A, March 2011
PDBI Message Error CodesProvisioning Database Interface Manual
To Next Page
