Identifier for this network entity.
id
1 to 15 hexadecimal digits expressed using ASCII characters.
Values:
Type of network entity being created.
type
SP – Signal Point
Values:
RN – Routing Number. (G-Flex only customers do not use RNs. Used
for A-Port and IS41 GSM Migration features.)
VMS – Voicemail Server. (Used for V-Flex customers.)
GRN – Generic Routing Number
Specifies the type of the point code.
pctype
intl - ITU international point code in the form zone-area-id (z-aaa-i).
Values:
natl - ITU national point code in the form of ITU number (nnnnn).
nl24 - ITU national 24-bit point code in the form of msa-ssa-sp
(mmm-sss-ppp).
ansi - ANSI point code in the form of network-cluster-member
(nnn-ccc-mmm).
none - No point code specified. (Only valid for RNs , VMSs, and GRNs.)
Point code value. The valid values depend on the pctype parameter.
pc
For pctype of intl the format is zone-area-id [(s-)z-aaa-i].
Values:
s - Optional spare point code indicator
z= 0 – 7
aaa= 0 – 255
i= 0 - 7
Note: The value 0-0-0 is not valid.
For pctype of natl the format is number [(s-)nnnnn].
nnnnn= 1 – 16383
For pctype of ansi, the format is network-cluster-member (nnn-ccc-mmm).
s - Optional spare point code indicator
nnn= 1 – 255
ccc= 1 – 255 (if network = 1 – 5)
= 0 – 255 (if network = 6 – 255)
98
910-6022-001 Revision A, March 2011
PDBI Request/Response MessagesProvisioning Database Interface Manual
To Next Page
Loading...
