5 to 15 hexadecimal digits expressed using ASCII characters.
Values:
Specifies which SP the IMSI is being moved to. The SP must correspond to an existing
SP entity.
sp
1 to 15 hexadecimal digits expressed using ASCII characters.
Values:
(Optional) Specify the number of seconds to wait for the write transaction if another
connection already has it. Clients waiting for the write transaction with this mechanism
timeout
are processed in the order that their requests were received. This option is only allowed
if the client used the txnmode single option on its connect request.
0 (return immediately if not available; default)
Values:
1 - 3600 seconds
Rules :
1. Thesp parameter must be specified.
Request syntax :
upd_sub([iid XXXXX,] imsi XXXXX, sp XXXXX,
[timeout <0..3600>])
Modify the Subscription Data of a Single DN
This command attempts to modify the Network Entity (SP, RN, VMS,or GRN) and portability type
fields of a specific DN. If the DN is a stand-alone DN, the fields are simply modified. If the DN is
associated with an IMSI and a new NE was specified in the request, the DN is removed from the IMSI
and changed to use the specified NE directly.
If a DN has a NE association and an update command specifies a new NE of the same NE type, a
replacement is attempted. Updating a DN by setting a NE type (sp/rn/vms/grn) to the value none,
results in a DN that is no longer associated with that NE. If a DN has an existing NE association and
an update command specifies a NE of a different NE type, will attempt to add a new NE association.
To replace a NE association with a new NE association of a different type, remove the old NE (specifying
value none) and enter the new NE. This is done in a single request or as two separate requests (one
command to remove the old NE and one command to add the new NE). Any update in which a
Network Entity type is specified is only allowed if the DN has not reached its maximum of 2 NEs.
Guidelines for using the TIF Number Substitution parameter nsdn and st can be found in TIF Number
Substitution Relationships . The default value for subscriber type st is Public. The rtrv_sub() command
will not list st in its response for records that have the default value Public.
The IDP calling and called party blacklist parameters (cgbl/cdbl) are optional and have a default
value of no. The GRN entity can optionally be associated with the DN. The GRN is used as redirection
digits if either the calling or called party blacklist parameters are set to yes. The IDP A-Party Blacklist
feature is not related to the EPAP Provisioning Blacklist feature.
75
910-6022-001 Revision A, March 2011
PDBI Request/Response MessagesProvisioning Database Interface Manual
To Next Page
Loading...
