This command is used for G-Flex, G-Port, and INP features, although some of the specific parameters
are only meaningful on specific features.
Parameters:
A single DN (specified in international format).
dn
5 to 15 hexadecimal digits expressed using ASCII characters.
Values:
(Optional) The portability type for the created DN. This field is only used by G-Port, A-Port,
IS41 GSM Migration, and PPSMS. For G-Port and A-Port, it controls number Portability
pt
Status encoding in SRI acks. For IS41 GSM Migration, it identifies whether a subscriber
has or has not migrated from IS41 to GSM, (maintaining a single GSM handset). For PPSMS,
it identifies a DN as one of two types needing PPSMS intercept.
none – no status (default = none)
Values:
0 – not known to be ported, migrated to IS41 or non-migrated IS41 sub (used for
IS41 GSM Migration)
1 – own number ported out (used for G-Port and A-Port)
2 – foreign number ported to foreign network (used for G-Port and A-Port)
3 – prepaid 1 (used by PPSMS)
4 – prepaid 2 (used by PPSMS)
5 – migrated to GSM (used for IS41 GSM Migration)
6 – prepaid 3 (used by PPSMS)
7 – prepaid 4 (used by PPSMS)
8 – prepaid 5 (used by PPSMS)
9 – prepaid 6 (used by PPSMS)
10 – prepaid 7 (used by PPSMS)
11 – prepaid 8 (used by PPSMS)
12 – prepaid 9 (used by PPSMS)
13 – prepaid 10 (used by PPSMS)
14 – prepaid 11 (used by PPSMS)
15 – prepaid 12 (used by PPSMS)
16 – prepaid 13 (used by PPSMS)
17 – prepaid 14 (used by PPSMS)
18 – prepaid 15 (used by PPSMS)
19 – prepaid 16 (used by PPSMS)
20 – prepaid 17 (used by PPSMS)
21 – prepaid 18 (used by PPSMS)
76
910-6022-001 Revision A, March 2011
PDBI Request/Response MessagesProvisioning Database Interface Manual
To Next Page
Loading...
