(Optional) Specific database level to use for this one report. Cannot be specified with
percent.
level
1 – 4294967295
Values:
(Optional) Lets the requester specify whether or not they want to the see list of Service
Module cards that were not at the main database level mentioned in the report.
data
status (default) - Return the list of Service Module cards.
Values:
none – Do not return the list of Service Module cards.
Request syntax:
rtrv_dsmrpt([iid XXXXX,] [percent ###], [level #####], [data
<none/except>])
Request Service Module Card Report Response
The data section of a successful Service Module card report request contains the following information:
Parameters :
This parameter contains the message segment number.
segment
Values: ≥ 1 – Incrementing integer starting from 1.
The database level that the report is referring to. The Service Module cards that satisfy
the report have levels equal to or greater than this value.
level
Values: 0 – 4294967295
The percentage of known Service Module cards that meet or exceed the level
percent
specified.
Values: 0 – 100
The total number of known Service Module cards in the
customer's network.
numdsms
Values: 0 – ####
List of Service Module cards that did not have a database level equal to or larger than
main message's level. Each Service Module card contains the following information.
dsms
Identifier for the Service Module card's EAGLE 5 ISS node. Values: String
up to 11 characters long
clli
Location identifier for the Service Module card in the EAGLE 5 ISS node.
Values: Four digit number
cardloc
133
910-6022-001 Revision A, March 2011
PDBI Request/Response MessagesProvisioning Database Interface Manual
To Next Page
Loading...
