Retrieve Subscription Information About a Specific DN
This command retrieves the subscription information for a specific DN. If the G-Port or INP feature
is available and the specific DN is not found, the PDBA also tries to find a DN block that the DN is in.
Parameters :
The specific DN to retrieve (specified in international format).
dn
5 to 15 hexadecimal digits expressed using ASCII characters.
Values:
(Optional) Lets the requester specify the type of output data to be returned. See Retrieve
Subscription Data Responses for additional information.
data
all – Return all known data for each instance. (default)
Values:
neonly – Return only the Network Element information for each
instance.
Request syntax :
rtrv_sub([iid XXXXX,] dn XXXXX, [data <all/neonly>]
Retrieve Subscription Information for a Range of DNs
This command retrieves all of the subscription data within a range of DNs.
Parameters :
The starting dn for the DN range (specified in international format).
bdn
5 to 15 hexadecimal digits expressed using ASCII characters.
Values:
The ending dn for the DN range (specified in international format).
edn
5 to 15 hexadecimal digits expressed using ASCII characters.
Values:
(Optional) Whether to report the DN blocks or the single DNs.
type
block – Searches the DN Block table. Reports only DN Blocks, regardless of
whether any provisioned Single DNs fall within the specified number range
Values:
single (default) - Searches the Single DN table. Returns only DNs that were
provisioned as Single DNs, regardless of whether the DN number falls within
the number range of a provisioned DN block)
90
910-6022-001 Revision A, March 2011
PDBI Request/Response MessagesProvisioning Database Interface Manual
To Next Page
Loading...
