Request syntax :
rtrv_sub([iid XXXXX,] imsi XXXXX, [data <all/neonly>])
Retrieve Subscription Information for a Range of IMSIs
This command retrieves all of the subscription data within a range of IMSIs.
Parameters :
The starting IMSI for the IMSI range.
bimsi
5 to 15 hexadecimal digits expressed using ASCII characters.
Values:
The ending IMSI for the IMSI range.
eimsi
5 to 15 hexadecimal digits expressed using ASCII characters.
Values:
(Optional) Filters the request to just retrieve the DNs in the range that are on the
provided SP.
sp
1 to 15 hexadecimal digits expressed using ASCII characters.
Values:
(Optional) Lets the requester specify the type of output data to be returned. See Retrieve
Subscription Data Responses for additional information.
data
all – Return all known data for each instance (i.e., list the DNs on each
IMSI) (default).
Values:
neonly – Return only the Network Element information for each instance.
count – Return only a single instance count of all instances matching the
query.
(Optional) Allows the client to limit the number of items to be returned.
num
1 - 40000000
Values:
Note:
If a substantial number of records are requested, there is a significant delay before the responses start
coming back.
95
910-6022-001 Revision A, March 2011
PDBI Request/Response MessagesProvisioning Database Interface Manual
To Next Page
Loading...
