Tektronix TDS2000C series User Manual

USB Flash Drive and Device Ports
Do NOT search fo
r the hardware to install on the web.
6. For a Windows XP systems, follow these steps:
a. If you see the Tektronix PictBridge Device dialog box, click Cancel.
b. When prompted, select the option that tells Windows NOT to connect to
Windows Update, and cl
ick Next.
c. In the next window, you should see that you are installing software for
a USB Test and Measurement Device. If you do not see USB Test
and Measurement Device software, the software that came with your
oscilloscope is not properly installed.
d. Select the option that installs the software automatically (the recommended
option) and click Next.
Windows will install the driver for your oscilloscope.
e. If you do not see the USB Test and Measurement Device in step c, or if
Windows cannot find the software driver, the software that came with
your oscilloscope is not properly installed.
In these situations, click Cancel to exit the Found New Hardware wizard.
Do NOT allow the wizard to finish.
Unplug the USB cable from your oscilloscope and install the software
from the CD that came with your os
cilloscope.
Reconnect your oscilloscope to the PC and follow steps 6a, 6b, 6c, and 6d.
f. Click Finish.
g. If a d ialog labeled Test an d Measurement Device appears, select what you
would like Windows to do, and click OK.
7. For Windows 2000 s ystems:
a. When prompted, select the option that tells Windows to display a list
ofknowndriversandclickNext.
b. In the next window, select USB Test and Measur
ement Device. If you do
not see a USB Test and Measurement Device selection, the software that
came with your oscilloscope is not properly installed.
c. In the next window, click Next to allow Windows to install the driver
for your oscilloscope.
Windows will install the driver for your oscilloscope.
d. If you do not see the USB Test and Measurement Device in step b, or if
Windows cannot find the software driver, the software that came with
your oscilloscope is not properly installed.
In these situations, click Cancel to exit the Found New Hardware wizard.
Do NOT allow the wizard to finish.
TDS2000C and TDS1000C-EDU Series Oscilloscope User Manual 71

Tektronix TDS2000C series Specifications

General

Brand	Tektronix
Model	TDS2000C series
Category	Test Equipment
Language	English