LE910Cx Hardware Design Guide
1VV0301298 Rev.40 Page 13 of 149 2023-03-16
Not Subject to NDA
2. GENERAL PRODUCT DESCRIPTION
Overview
LE910Cx is Telit’s new LTE series for IoT applications.
In its most basic use case, the LE910Cx can be applied as a wireless communication
front-end for telematics products, offering GNSS and mobile communication features to
an external host CPU through its rich interfaces.
LE910Cx is available in hardware variants as listed in Table 1: Applicability Table. For
differences in the designated RF band sets – refer to Section 2.6.1, RF Bands per Regional
Variant.
Note:
(EN) The integration of the LE910Cx cellular module within user
application shall be done according to the design rules described in this
manual.
(IT) L’integrazione del modulo cellulare LE910Cx all’interno
dell’applicazione dell’utente dovrà rispettare le indicazioni progettuali
descritte in questo manuale.
(DE) Die Integration des LE910Cx Mobilfunk-Moduls in ein Gerät muß
gemäß der in diesem Dokument beschriebenen Kunstruktionsregeln
erfolgen.
(SL) Integracija LE910Cx modula v uporabniški aplikaciji bo morala
upoštevati projektna navodila, opisana v tem priročniku.
(SP) La utilización del modulo LE910Cx debe ser conforme a los usos
para los cuales ha sido deseñado descritos en este manual del usuario.
(FR) L’intégration du module cellulaire LE910Cx dans l’application de
l’utilisateur sera faite selon les règles de conception décrites dans ce
manuel.
(HE)
To Next Page
Loading...
Need help?
General
