1. The telephone line cord is already
tted but don’t plug the other end
into the wall socket yet.
2. Plug the mains power adaptor into
the base, with the cable clipped in
the groove provided.
3. Turn the cable when clipping into
the groove so that the narrow part
ts between the clips before turning
the cable back to secure.
4. Plug the other end of the power
adaptor into the wall power socket
and switch on.
Quick set-up guide4
1 Plug in
3
12
If you need some help, call us on 13 2200 or go to https://go.telstra.com.au/helpandsupport/home-phone/
To Next Page
Loading...
