Telstra TCG301 - To Change any Base Settings; Base Ringtone Melody and Volume; PBX Access Code

Settings
If you need some help, call us on 13 2200 or go to https://go.telstra.com.au/helpandsupport/home-phone/
56
To change any Base settings
1. Firstly, select Menu, scroll
CALLS
to display Settings and press Select.
Then choose the base setting you want to change from the options below:
Base ringtone melody and volume
Choose from ve base ringtones. The default is Melody 1. There are ve base
ringer volume levels plus Ringer Off. The default is Level 3.
2. Press
CALLS
to highlight Base settings, press Select.
3. Ringing is highlighted, press Select.
4. Press
CALLS
or
CALLS
to select the ringtone melody, then press
CALLS
to select the volume
level you want and select Save.
PBX access code
If you’re connected to a switchboard, you might need to enter an access code
(e.g. 9) before you dial a number. Your Telstra Call Guardian 301 can store an
access code which is automatically dialled before each number. We cannot
guarantee that all the Telstra Call Guardian 301 features will work when
connected to a PBX.
2. Press
CALLS
to highlight Base settings, press Select.
3. Press
CALLS
to highlight PBX code, press Select. Enter the number you want
(maximum four digits). If you wish to stop using a PBX access code, go into the
PBX code menu and delete all the digits by selecting Clear, then select Save.