Telstra TCG301 - Change the System PIN (Different to the Remote Access PIN); Reset the Handset or Base Settings

Settings 57
If you need some help, call us on 13 2200 or go to https://go.telstra.com.au/helpandsupport/home-phone/
Change the system PIN (different to the Remote access PIN)
2. Press
CALLS
to highlight Change Sys. PIN, press Select. If the current PIN is
0000, you’ll be prompted to enter the new four digit PIN, then press OK.
If the current PIN is not 0000, you’ll be prompted to enter the old (current) four
digit PIN rst and then select OK. Then follow the prompts and enter the new
four digit PIN.
3. Enter the new four digit PIN again and select OK. The display will show
New system PIN saved.
Reset the handset or base settings
2. Press
CALLS
to highlight Reset, press Select.
3. H/set settings is highlighted. Press Select or press
CALLS
to highlight Base
settings and then press Select.
4. Reset <handset or base> settings back to default? is displayed, select Yes.
5. Resetting <handset or base> settings is displayed while the reset takes place.
6. Once a base reset is complete, Base settings reset back to default is displayed
on the handset.
Once a handset reset is complete the handset will show the standby screen.