If you need some help, call us on 13 2200 or go to https://go.telstra.com.au/helpandsupport/home-phone/
If you’ve bought a Telstra Call Guardian 301 multiple pack, any additional
handsets come pre-registered to the base. However, if you purchase another
additional handset separately, you must register it to your Telstra Call Guardian
301 base before it can be used. You can register up to six GAP compliant
handsets to your Telstra Call Guardian 301 base.
Register an additional Telstra Call Guardian 301 handset
1. Select Menu, scroll
CALLS
to display Settings and press Select.
2. Press
CALLS
to highlight Registration and press Select.
3. Register is highlighted, press Select.
4. Press and hold Page button on base is displayed.
5. Press and hold
on the base until you hear a beep and the In use light starts
to ash.
6. Immediately, select OK on the handset. The handset will display Registering
handset to indicate the base is in registration mode. If you have changed the
system PIN from 0000 you will be prompted to enter it, then select OK.
7. Once registration is successful the handset will show Handset x registered
(with x being the assigned handset number). The handset will then synchronise
data with any other registered handsets, e.g. contacts, speed dials, handset
names and text messages.
You have 2 minutes to complete the registration process. After 2 minutes the
In use light on the base will stop ashing. If registration isn’t successful the
rst time, please try again in case the base registration period ran out of time.
Using additional handsets68
To Next Page
Loading...
