Teltonika RUT9 Series User Manual

5.
Signal
strength
-65dBm
Received Signal Strength Indicator (RSSI). Signal's strength measured in
dBm
6.
Cell ID
FD90B
ID of operator cell that device is currently connected to
7.
RSRP
-88dBm
Indicates the Reference Signal Received Power
8.
RSRQ
-7dBm
Indicates the Reference Signal Received Quality
9.
SINR
-21.4dBm
Indicates the Signalto Interference Noise Ratio
10.
Operator
state
LT BITE GSM
Operator's name of the connected GSM network
11.
Operator
Registered (home)
GSM network's status
12.
Connection
type
4G (LTE)
Indicates the GSM network's access technology
13.
Bytes
received
3.3 Kb (3345 bytes)
How many bytes were received via mobile data connection
14.
Bytes sent
3.4 kb (3487 bytes)
How many bytes were sent via mobile data connection
6.3.1.2 WAN
Displays information aboutWAN connection.
WAN information:
Field Name
Sample Value
Explanation
1.
Interface
Wired
Specifies through what medium the router is connecting to the internet.
This can either be Wired, Mobile or Wi-Fi.
2.
Type
Static
Specifies the type of connection. This can either be static or DHCP.
3.
IP address
192.168.99.69
The IP address that the routers uses to connect the internet.
4.
WAN MAC
00:1E:42:00:00:01
MAC (Media Access Control) address used for communication in a Ethernet
WAN (Wide Area Network)
21

Teltonika RUT9 Series Specifications

General

Brand	Teltonika
Model	RUT9 Series
Category	Network Router
Language	English