Teltonika RUT9 Series User Manual

7 Network
7.1 Mobile
7.1.1 General
7.1.1.1 Mobile configuration
Here you can configuremobile settings which are used when connecting to your local 3G/LTE network.
Field Name
Sample value
Explanation
1.
Mobile
connection
PPP / NDIS
PPP mode uses dialling number to establish data connection.
NDIS mode (default) does not use dialling and PPP protocol to
establish data connection it is usually faster than PPP mode.
2.
Mode
NAT / Passthrough / Use
bridge
NAT mode enables network address translation on router. Bridge
mode bridges LTE data connection with LAN. In this mode the router
does not have internet connection as ISP provides IP directly to end
device (PC, tablet or smartphone).Using Bridge m
ode will disable
most of the router capabilities and you can access your router's
settings only by using static IPaddress
on your end device.
Passthrough
mode is similar with bridge mode except that in
passthrough mode router do have internet connection.
3.
APN
“APN”
Access Point Name (APN) is a configurable network identifier used
by a mobile device when connecting to a GSM carrier.
4.
PIN number
“1234” or any number
that falls between 0000
and 9999
A personal identification number is a secret numeric password
shared between a user a
nd a system that can be used to
authenticate the user to the system.
5.
Dialing
number
*99***1#
Dialling number is used to establish a mobile PPP (Point-to-Point-
Protocol) connection.
6.
Authentication
CHAP, PAP or none
Authentication method, which your carrier uses to authenticate new
46

Teltonika RUT9 Series Specifications

General

Brand	Teltonika
Model	RUT9 Series
Category	Network Router
Language	English