7.3.2.2 Advanced settings
You can also define some advanced options that specify how the DHCP server will operate on your LAN network.
Dynamically allocate client addresses, if set to 0 only clients present
in the ethers files are served
Forces DHCP serving even if another DHCP server is detected on the
same network segment.
You can override your LAN netmask here to make the DHCP server
think it’s serving a larger or a smaller network than it actually is.
Additional options to be added for this DHCP server. For example
with '26,1470' or 'option:mtu, 1470' you can assign an MTU per
DHCP. Your client must accept MTU by DHCP for this to work.
7.4 VLAN
On this page you can configure your virtual LAN settings, either Port based or Tag based.
7.4.1 VLAN Networks
7.4.1.1 VLAN Functionality
Disabled / Port based /
Tag based
Lets user to choose the VLAN mode or disable VLAN functionality.
To Next Page
Loading...
Need help?
General
