- 96 -
Step 3 Set IP Address to an IP address in the same segment as the LAN IP address of the router, such
as any IP address in 192.168.1.3~192.168.1.254. It cannot be the same as the LAN IP address
of the router. (The default LAN IP address of the router is 192.168.0.1.)
Step 4 Click Add.
---End
Verification
Verify that the same IP address is assigned to the device each time it connects to the router.
To unbind the device from the IP address, click corresponding to the device.
3.9.3 WAN Settings
To configure WAN settings, choose System Settings > WAN Settings.
To Next Page
Loading...
